Olympus E-300 - Manual (Page 105)

105
6
Exposure
,
ima
g
e and color
1
Menu T T NOISE REDUCTION T
ON
~
“How to use the menus” (P. 25)
2
Press the OK button.
3
Take a picture.
● The noise-reduction process is activated after
shooting.
● The card access lamp blinks during the noise-reduction process. You cannot take more
pictures until the card access lamp goes out.
● Busy is displayed while noise reduction is operating.
● When ,
, , or mode is set, NOISE REDUCTION is fixed to
ON.
● When NOISE REDUCTION is set to ON, sequential shooting is not
available.
● This function may not work effectively with some shooting conditions or
subjects.
Note
NOISE REDUCTION
This function reduces the noise that is generated during long exposures. When
shooting night scenes, shutter speeds are slower and noise tends to appear in
images. When NOISE REDUCTION is set to ON, the camera automatically
reduces noise to produce clearer images. However, shooting time is
approximately twice as long as usual.
For more information about noise generated in images during long exposures,
refer to “Noise in images” (P. 51).
NOISE REDUCTION: OFF NOISE REDUCTION: ON
P A S M Available modes
NR
MENU
OK button
06E-300EN-P85 04.10.22 11:26 AM Page 105