Olympus E-620 - Manual (Page 91)

91
EN
Pla
y
back functi
ons
6
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the 0
button.
• 9 (protect mark) is displayed on the top right corner of the screen.
To cancel the protection
Display the images that are protected and press the
0 button.
Protecting selected frames
This function lets you select multiple images and protect them all at the same time during
single-frame playback or index display.
1
Display the images you want to protect and press the i button.
• The selected images will be shown with v.
• To cancel your selection, press the
i button again.
• During index display, press p to select the images you want to protect and press the i button.
2
Press p to display the next images you want to protect and press the i
button.
3
After you have selected the images to protect, press the 0 button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1
MENU[q][RESET PROTECT]
2
Use fg to select [YES], then press the i button.
x
Notes
• Formatting the card erases all images even if they have been protected.
g“Formatting the card” (P. 126)
• Protected images cannot be rotated even when the F button is pressed.
Protecting images
i button
0 button
E-620_MASTER.fm Seite 91 Dienstag, 17. Februar 2009 11:04 11