Olympus E-620 - Manual (Page 64)

64
EN
3
Focusi
ng and
sh
ooting
functions
Bulb shooting with the remote control
Set the mode dial to M, then set the shutter speed to [BULB].
g“Bulb shooting” (P. 47)
You can reduce the amount of camera shake that easily occurs when shooting in low light
situations or shooting with high magnification.
OFF Image stabilizer is off.
I.S. 1 Image stabilizer is on.
I.S. 2 This is used for panning with the camera in the horizontal direction to achieve a
blurred background. The horizontal image stabilizer is turned off, and only the
vertical image stabilizer is activated.
I.S. 3 This is used for panning with the camera in the vertical direction to achieve a blurred
background (tilting). The vertical image stabilizer is turned off, and only the
horizontal image stabilizer is activated.
Setting the focal length
By setting the focal length of the lens in advance, you can
use the image stabilizer function with lenses other than
Four Thirds system lenses. This setting is deactivated
when a Four Thirds system lens is attached.
1
Press the F button when the image stabilizer is
turned on.
2
Use the control dial or fg to set the focal
length and press i.
Image stabilizer
Direct button oj
Viewfinder
: OFF
: I.S. 1
: I.S. 2
: I.S. 3
Press the W button on the remote
control to open the shutter.
When the time set in “BULB
TIMER” ( gP. 102) elapses, the
shutter closes automatically.
Press the T button to close the
shutter.
o button
j
I.S. 1 I.S. 2 I.S. 3
IMAGE STABILIZER
FOCAL LENGTH mm
OFF
50
SET
E-620_MASTER.fm Seite 64 Dienstag, 17. Februar 2009 11:04 11