Olympus E-620 - Manual (Page 14)

14
EN
Power on
ON OFF
SSWF
Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic vibrations
are used to remove dust and dirt from the image pickup device’s filter surface. The SSWF (Super Sonic
Wave Filter) indicator blinks while dust reduction is working.
Adjust the viewfinder’s diopter in accordance
with your vision.
While looking through the viewfinder, rotate the
diopter adjustment dial little by little.
When you can see the AF target clearly,
adjustment is complete.
Adjusting the viewfinder’s
diopter
Viewfinder
Diopter adjustment dial AF target
• To turn off the power, set the ON/OFF switch to OFF.
1
Set the camera’s ON/OFF switch to ON
2009. 03.16
AF
arge
Normal
OFF
AUTO
INFO button
Mode dial
Set the mode dial to AUTO.
SSWF indicator
ON/OFF switch
When the camera is turned on, the
super control panel screen is displayed
on the monitor.
If the super control panel screen does
not appear, press the
INFO button.
LCD monitor
Super control panel
E-620_MASTER.fm Seite 14 Dienstag, 17. Februar 2009 11:04 11