Olympus E-620 - Manual (Page 20)

20
EN
Using the direct buttons to operate the
camera
SELECT SET
1
Press the button for the function you
want to set
• The direct menu is displayed.
e.g.) Setting Sequential/Self-timer/
Remote control shooting
List of direct buttons
No. Direct buttons Function Ref. page
1 Y/j Remote control/Self-timer/Sequential shooting P. 61-62
2 # Sets flash mode P. 74
2+3 # + F Flash intensity control P. 77
3 F Exposure compensation P. 49
4 P AF target selection P. 57
5 o Sets image stabilizer P. 64
6 WB Sets white balance P. 68
7 AF Sets AF mode P. 55
8 ISO Sets ISO sensitivity P. 52
9 d Sets metering mode P. 48
3
8
2 1
4
5
6
7
j
Control dial
9
Direct menu
2
Turn the control dial to change the setting
• The function assigned to the button that was pressed remains selected for approximately 8
seconds. You can turn the control dial and set the function during that time. If no operations are
performed for 8 seconds, the setting for that function is confirmed.
g“BUTTON TIMER” (P. 98)
E-620_MASTER.fm Seite 20 Dienstag, 17. Februar 2009 11:04 11