Olympus E-520 - Manual (Page 86)

8
Pl
ayback
functi
ons
86
EN
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x
Notes
• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG, both
the RAW and JPEG images are erased. When using single-frame erase, you can select whether to
erase the JPEG, RAW, or both RAW and JPEG images.
g“RAW+JPEG ERASE” (P. 95)
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored.
g“Protecting images” (P. 85)
Single-frame erase
1
Play back the image you want to erase and press
the
S button.
2
Use ac to select [YES], then press the i
button.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or index
display.
1
Display the images you want to erase and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the
i button again.
• During index display, press p to select the images you want to erase and press the i button.
2
Press p to display the next images you want to erase and press the i button.
3
After you have selected the images to erase, press the S button.
4
Use ac to select [YES], then press the i button.
All-frame erase
1
MENU[W][CARD SETUP]
2
Use ac to select [ALL ERASE], then press the i button.
3
Use ac to select [YES], then press the i button.
• All frames will be erased.
To erase immediately:
j If you have set “QUICK ERASE” (gP. 94) to [ON], pressing the S button will erase an image
immediately.
j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 95)
Erasing images
TIPS
S button