Blaupunkt RDM 127 User Manual
Page 60
60
Use DNC for the preliminary check.
DNC-LEVEL OFF means linear frequency
DNC-LEVEL LOW means slight emphasis on bass sound
DNC-LEVEL MID means medium emphasis on bass sound
DNC-LEVEL HIGH means heavy emphasis on bass sound.
•
Press S,
EQ
one after the other.
Place the microphone in one of the positions.
•
Press the corresponding softkey (AUTO-EQ1 ... AUTO-EQ3) for approxi-
mately 1 second.
PLEASE PLACE MICROPHONE 10 ... 0
, the countdown has begun. The
calibration procedure will run automatically after the countdown.
Make sure that the surroundings are as quiet as possible during the calibration
procedure. Press
STOP
to abort the calibration if necessary.
As soon as the calibration procedure has been completed, AUTO-EQ READY ...
will appear in the display. The following question will appear in the display: ALL
BASS/TREBLE ADJUSTMENTS ARE SET TO “0”.
•
Press either
YES
or
NO
.
The calibration process for this setting has been completed.
Checking/altering Hi-fi calibration
If necessary, you can check or correct the automatic calibration for any of the
channels:
•
Press S,
EQ
one after the other.
•
Press the corresponding softkey briefly (AUTO-EQ1 ... AUTO-EQ3). The
function selected, e.g.
AUTO-EQ2
will be highlighted in the display.
•
Press
VIEW EQ
.
VIEW AUTO-EQ 2
will appear in the display header,
for example. The display will indicate the equalizer settings for the front left
loudspeaker.
S
10
AUTO-EQ ADJUST
PLEASE PLACE
MICROPHONE
STOP
S
------------------
NEXT
VIEW AUTO-EQ 2
FRONT LEFT
EXIT
S
SET TO "0"
YES
AUTO-EQ READY
ALL BASS/TREBLE
ADJUSTMENTS ARE
NO
BA NewYork gb®
24.05.2002, 11:59 Uhr
60