Blaupunkt RDM 127 - Manual (Page 12)

12
Displaying the radio pass data
After inserting the original KeyCard, you can have the radio pass data such as
the model name, the product number (7 6...) and the serial number shown in the
display.
•
Insert the original KeyCard and switch the unit on.
• Press S for approximately 1 second. DSC-MAIN MENU will appear in the
display header.
• Select the following functions one after the other: KEYCARD and
READ KC .
The radio pass data will appear in the display. If the data does not appear in the
display, then a replacement KeyCard or an incorrect (WRONG) KeyCard has
been inserted.
• Press EXIT (repeatedly if necessary) to exit the menu.
Short Additional Memory (S.A.M)
Using the second KeyCard which can be purchased at any specialised dealer-
ship, you can program a short text by selecting the DSC menu item READ KC.
This text might be the telephone number of a car repair service or the emergency
call number of your auto club.
Any specialised dealer with the proper equipment can program the desired text
with up to a maximum of 54 characters onto the KeyCard.
Turn On Message (T.O.M.)
Using the second KeyCard which can be purchased at any specialised dealer-
ship, you can program the unit to display a selected “Turn On Message” after the
set is switched on.
Any specialised dealer with the proper equipment can program the desired text
with up to a maximum of 48 characters onto the KeyCard.
Each time you switch on your car radio using the second KeyCard, this text will
appear in the display.
S
DISPLAY
VARIOUS
KEYCARD
DSC-MAIN MENU
TUNER
EXIT
S
READ KEYCARD
EXIT
7646860010BP6860
T.......
Bremen RCM 127
S
DSC-KEYCARD
LEARN KC
EXIT
READ KC
BA NewYork gb® 24.05.2002, 11:58 Uhr 12