Blaupunkt RDM 127 - Manual (Page 30)

30
Switching the priority on/off:
• Press TA .
Interrupting a traffic message when it is being broadcast:
Press EXIT or SRC on the remote control during the message. This inter-
rupts the priority for this message only.
The set will then switch back to the previous mode of operation. The recording of
this message in the TIM memory will only be interrupted if the message was
switched through by EON.
The priority for other traffic messages will remain active.
If you press TA OFF you will switch off the priority status for traffic messages.
Warning beep
Situation: The priority for traffic messages is activated, TA is lit up in the display.
If you select a radio station which does not broadcast traffic announcements or
leave the reception area of the traffic programme station you are currently tuned
into,
TA will disappear from the display and you will hear a warning beep approx-
imately every 30 seconds.
This beep indicates that not all of the traffic message functions are activated.
Switching the warning beep off
Tune into another station which broadcasts traffic information or switch off the
priority for traffic announcements in the main radio menu by pressing
TA .
Automatic start of station search
(when operating the CD player or the optional CD changer)
When you leave the reception area of the traffic programme station you are tuned
into while listening to a CD, the system will automatically start searching for a
new TA programme.
S
LW
TA
PTY
R-TEXT
REGIONAL
NDR 2
FM
MW
S
TA OFF EXIT
TRAFFIC MESSAGE
NDR 2
BA NewYork gb® 24.05.2002, 11:58 Uhr 30