Blaupunkt RDM 127 - Manual (Page 50)

50
• Press TPM until you hear a beep.
The track has been stored. TPM PROGRAMMED will appear in the display head-
er.
Select the next track and store it by pressing TPM etc., as described above.
You can store tracks at any time while they are being played. Both TPM and
SCAN must be switched off.
CD playback with TPM
The TPM function must be switched on ( TPM appears highlighted in the display).
The tracks stored with TPM will be played in ascending order. Any tracks which
have not been stored will be skipped.
If a CD without TPM is selected while TPM is active, then NO TPM ON DISC
will appear in the display header. This CD will be played back normally. TPM will
be active again for the next CD selected automatically.
Deleting the TPM memory (TPM CLR)
Using TPM CLR (clear) you can delete individual tracks, all of the tracks on one
CD, all of the tracks on the magazine currently inserted or all of the magazines.
If the TPM memory is empty, NOT MEMORIZED will appear in the display head-
er.
Select the changer functions menu. If necessary,
•
press CDC.
a) Deleting the TPM memory for one track:
• Select the track by pressing / .
• Press TPM CLR for approximately 1 second. TPM TRACK CLRD
will appear in the display header. You will hear a beep at the same time.
This track has been deleted in the TPM memory.
S
REPEAT
TPM
TPM CLR
CDC NAME
TPM PROGRAMMED
MIX
SCAN
TIME
S
REPEAT
TPM
TPM CLR
CDC NAME
DISC 01 TR 02
MIX
SCAN
TIME
S
REPEAT
TPM
TPM CLR
CDC NAME
TPM TRACK CLRD
MIX
SCAN
TIME
BA NewYork gb® 24.05.2002, 11:59 Uhr 50