Blaupunkt RDM 127 - Manual (Page 33)

CD - Betrieb (Option)
33
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
Setting the exact time
TIM needs the exact time in order to operate precisely. Note that the clock also
has to be reset after any interruption in the power supply. If the time display is
highlighted there has been an interruption in the power supply. When you switch
the radio on, the
FIRST INSTALL menu will appear automatically.
Setting the clock following an interruption in the power supply
• Press CLOCK and the time will be appear in the display header.
To set the clock
•
alter the hours by pressing - HOURS / HOURS + and the minutes
by pressing - MIN / MIN + . When you have completed resetting
the clock
• press EXIT . Return to the previous menu by way of the FIRST
INSTALL menu.
Displaying the time
The time will appear in the display header if you
•
press S briefly.
Correcting the time
The clock can be reset in the FIRST INSTALL menu and in the DSC-MAIN
MENU .
If necessary, call up one of these menus and set the exact time.
Using the FIRST INSTALL menu
•
Switch the unit off.
• Press S (and hold it down) and switch the unit back on. The FIRST
INSTALL menu will appear in the display.
• Select CLOCK and set the correct time.
S
AUX-IN
NORM SET
FIRST INSTALL
CLOCK
OWNER-ID
EXIT
S
HOURS +
MIN +
CLOCK
- HOURS
- MIN
EXIT
12:27
BA NewYork gb® 24.05.2002, 11:58 Uhr 33