Blaupunkt RDM 127 - Manual (Page 17)

CD - Betrieb (Option)
17
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
Radio operation with RDS (Radio Data System)
This radio is equipped to receive the following wavebands: FM, MW and LW.
In combination with the two FM tuners, the Radio Data System guarantees ex-
cellent reception quality and more convenience when listening to the radio.
RDS functions such as station recognition, including a regional identifier, and the
display of the station name have become standard features. Using PTY (pro-
gramme type identification) you can select which type of programme, e.g. news,
sports, light classical music, etc., you would like to listen to. However, the PTY
signal is not yet broadcast by all radio stations.
During FM operation, the station names in the reception table indicate which
stations you can tune into. Stations which do not transmit an RDS signal are
listed at the bottom of the table along with their frequencies.
The display header indicates the current status.
You can use the softkeys to select the corresponding stations directly.
It is possible to store a preference table (memory table) for each of the wave-
bands. These tables will display the stations you have stored.
Switching to the radio mode
• Press TU (tuner). The TU main menu will appear in the display (radio
menu). The display will indicate the status selected last.
Selecting the waveband
You must have the TU main menu in the display.
• Press TU once or repeatedly as necessary.
• Select the desired waveband with the corresponding softkey, e.g. select
FM .
The display will now show the reception table, i.e. all of the stations within recep-
tion range will be displayed for this waveband.
S
LW
TA
PTY
R-TEXT
REGIONAL
NDR 2
FM
MW
BA NewYork gb® 24.05.2002, 11:58 Uhr 17