Olympus DM-5 - Manual (Page 96)

96
3
EN
Menu setting method
When you select [Selected files]:
1 Press the + or − button to select the
file you want to move or copy.
2 Press the `OK button to check the
file(s) selected.
3 Repeat steps 1 and 2 until all the
files you want to move/copy are
selected then press the F2 (GO)
button.
When you select [All files]:
When all files are selected, all the files
in the folder will be automatically
selected and the recorder will move
to the [Folder to move] screen.
7
Press the
9 , 0, + or −
button to select the folder you
want to move or copy the file to.
8
Press the F2 (Go) button.
• File move or file copy will start if
[Moving!] or [Copying!] appears on
the display.
The process is completed when [File
move completed] or [File copy
completed] is displayed.
Notes
• The recorder cannot copy when the
memory capacity is not sufficient.
• The recorder cannot move or copy when
the number of file exceeds 999.
• Do not remove the battery during moving
or copying. This may damage the datas.
• A file cannot be moved or copied to the
same folder.
• When the operation is canceled during
moving or copying, only the file that is
being moved or copied is effective, all
other files will become not effective.
• Files which are locked (
☞ P.77) will remain
so even after they are moved or copied.
• DRM files cannot be moved or copied.
• Files cannot be moved or copied directly
under the [Recorder] folder.
M
e
nu
set
ting
m
e
th
od