Olympus DM-5 - Manual (Page 71)

71
3
EN
M
e
nu
set
ting
m
e
th
od
Low Cut Filter
The recorder has a Low Cut Filter function to
minimize low-frequency sounds and record
voices more clearly. This function can reduce
noise from air conditioners, projectors and
other similar noises.
1
Select [Low Cut Filter] from the
menu on the [Rec Menu].
2
Select [On] or [Off].
[On]:
Enables the Low Cut Filter function.
[Off]:
Disables this function.
VCVA
When the microphone senses that sounds have
reached a preset threshold volume level, the
built-in Variable Control Voice Actuator (VCVA)
starts recording automatically, and stops
when the volume drops below the threshold
level. The VCVA feature extends recording
time and conserves memory by stopping
recording during silent periods, which helps
the playback to be more efficient.
1
Select [VCVA] from the menu on
the [Rec Menu].
2
Select [On] or [Off].
[On]:
Enables the VCVA function. Will start
recording in VCVA mode.
[Off]:
Disables this function. Will resume
recording in normal mode.
Adjust the start/stop actuation
level:
• If the surrounding noise is loud, the
starting sensitivity of the VCVA can be
adjusted according to the recording
situation.
1
Press the REC button to start
recording.
• When the sound volume is lower than
the preset threshold sound level,
recording automatically stops after
1 sec approximately, and [Standby]
flashes on the display. The LED
indicator light glows orange when
recording starts and flashes when
recording pauses.
2
Press the
9 or 0 button to
adjust the start/stop actuation
level.
a Level meter (varies according to the
sound volume being recorded)
b Start level (moves to the right/left
according to the set level)
• The VCVA level can be set to any of 23
different values ([-1]~[-42]).
• The higher the value, the more
sensitive the recorder to sounds. At
the highest value, even the faintest
sound will activate recording.
• Press the F1 button to change the
recording level (
☞ P.69) during VCVA
recording. The recording level can be
adjusted.
Menu setting method
a
b