If the correct focus cannot be obtained, How to focus (focus lock) – Olympus SP-350 User Manual

Page 24

fore yo

u start

takin

ures

If the correct focus cannot be obtained

The camera automatically detects the focus target in the frame. The level
of contrast is one of the criteria it uses to detect the subject. The camera
may fail to determine subjects with lower contrast than the surroundings or
with an area of extremely strong contrast in the frame. If this happens, the
simplest solution is to use the focus lock.

Position the AF target mark on
the subject you want to focus on.

• When shooting a hard-to-focus or fast-

moving subject, focus the camera on an
object about the same distance away as
the subject.

Press the shutter button halfway
until the green lamp lights.

• The green lamp lights when the focus

and exposure are locked.

• When the green lamp blinks, the focus

and exposure are not locked. Release your finger from the shutter button,
re-position the AF target mark on the subject and press the shutter button
halfway again.

Keeping the shutter button
pressed halfway, recompose
your shot.

Press the shutter button fully.

• The camera takes the picture. The

orange lamp blinks while the picture is
recorded.

How to focus (focus lock)

1600

1600×1200

1200

SQ1

0.0

F4.0

1/200

AF target mark

Shutter button