Olympus SP-350 - Manual (Page 109)

109
7
Setti
ng
s
Resetting the settings to the default (RESET)
The camera retains the changed settings for shooting functions even if the
power is turned off (except for
h and f). Use [RESET] to reset the
settings (other than My Mode settings and [SETUP] tab in mode menu) to
the factory default settings. For a list of the default settings, see “List of
factory default settings” (P. 186).
Top menu [MODE MENU] [SETUP] [RESET]
g“Using the menus” (P. 17)
1
Select [YES], and press
Z.
• Settings are reset to the factory default.
You can select a language for on-screen display. Available languages vary
depending on the area where you purchased this camera.
Top menu [MODE MENU] [SETUP] [W]
g“Using the menus” (P. 17)
1
Select a language, and press
Z.
TIPS
To increase the number of languages
j You can add other languages to your camera with the provided OLYMPUS
Master software. For details, refer to the help in the OLYMPUS Master
software.
YES
NO
RESET TO DEFAULT
RESET
OK SELECT GO
Selecting a display language
FRANCAIS
ESPAÑOL
PORTUGUES
SELECT OK GO
ENGLISH