Olympus IR-300 - Manual (Page 64)

64
5
Add
it
ion
al p
lay
bac
k
f
u
nct
ion
s
Adding sound to still pictures
Sound can be added to a still picture that you have already taken. You can
also re-record over the sound that has already been recorded. Total
recording time per picture is approximately 4 seconds.
Select the still picture to which you want to add sound and display the top
menu.
Top menu [MODE MENU] [R] g“Using the menus” (P. 18)
1
Press ] to display [START].
2
Aim the camera microphone
toward the sound you want to
record, and press i to start
recording.
• The [BUSY] bar is displayed during
recording.
Note
• If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not
be recorded properly.
• If you re-record the sound, the original sound is erased.
• Sound recording may not be possible if there is insufficient space in the internal
memory or the card.
• Sound recording may pick up camera noises, such as button operation or
shutter movement.
• Once sound is added to a picture, it is not possible to erase only the sound. In
this case, make a re-recording with silence.
START
FIX IMAGE
COMPOSE IMAGE
y
R
EDIT
Microphone