Olympus IR-300 - Manual (Page 106)

Using the camera with a Dock&Done storage unit (hard disk/DVD)
106
9
i
fu
ncti
on
s
4
Set the camera in the cradle.
• The camera turns on, and the [ _DOCK
MODE] screen is displayed.
• The camera is powered by the AC
adapter of the storage unit.
• When an unformatted disk is inserted in
the DVD storage unit, the disk format
screen is displayed. For details, refer to
the instruction manual for your DVD
storage unit.
5
Select [STORE ONLY], and press
i.
• The displayed screen and selectable
items vary depending on the camera
settings.
g“Camera settings” (P. 113),
“[ _DOCK MODE] screen menu”
(P. 112)
• When the pictures have been stored,
the camera turns off automatically.
TIPS
• You can also individually select the pictures to be stored to the storage unit.
g“Storing pictures (STORE)” (P. 113)
• You can also set the camera to automatically erase pictures after they have
been stored to the storage unit. g“Settings after storing (STORE AND)”
(P. 113)
• When the camera is off, the camera battery is charged by the AC adapter of the
storage unit.
Note
• When a card is inserted in the camera, only the pictures on the card are stored.
To store pictures in the internal memory, remove the card.
• Packet-writing software is required if you want to view pictures stored on a disk
with the DVD storage unit. For details about packet-writing software, see the
manual of the optional Dock&Done DVD storage unit.
DOCK MODE
20SEC. TILL AUTO STORE
STORE PRINT ORDER
STORE ONLY
SEL. PRINT STORE
EXIT