Olympus IR-300 - Manual (Page 14)

Direct buttons
14
1
Basi
c operati
o
n Basic functions can be easily operated using direct buttons. Use the arrow pad and
i to adjust settings. Follow the on-screen display to select and adjust each setting.
How to set the flash mode using
n is shown below.
1
Set the mode switch to K, and press n.
• The flash mode selection screen is displayed.
2
Press [\ to select the flash mode.
3
Press i.
• The setting is made, and the menu closes.
Using the direct buttons
FLASH MODE
AUTO
GO SELECT
Current setting
Operation guide
SELECT → Press [\ to select the
setting.
GO → Press i to commit
your selection.
FLASH MODE
AUTO
GO SELECT
Selected setting
This indicates more settings
below. Press
\ to display the
next item.