Olympus C-5000 Zoom - Manual (Page 27)

26
Power on/off
1
Ge
tt
in
g
st
ar
te
d
If the card is not recognized (card check)
When the power is turned on, the camera checks the card automatically. If
there is no card in the camera or a card that is not supported by this camera
is inserted, the following screen is displayed.
• All data stored on the card is erased when the card is formatted.
Monitor indication Corrective action
q
NO CARD
There is no card in the camera or the card is not
inserted properly.
→ Insert a card. If a card is already inserted,
remove it and insert it again correctly.
The card cannot record, play back or erase
pictures. Format the card or replace it with a new
one.
→ Press ac to select POWER OFF, then press
e. Replace the card with a new one.
→ Format the card.
Press ac to select I FORMAT, then press
e to display the confirmation screen. Select
YES and press e.
Formatting starts. If the card was successfully
formatted, the camera is ready to take pictures.
POWER%OFF
FORMAt
CARD%SEtUP
SELECt GO
NO
CAUtION ERASING%ALL
SELECt GO
FORMAt
YES
Note