Olympus EVOLT E-410 User Manual

Page 73

Customizing the settings/functions of your camera

AEL metering

Sets the metering mode for when pressing the

AEL (AE lock) button to lock the exposure.

MENU[Y][AELMetering]

[AUTO]/[4]/[n]/[nHI]/[nSH]

• [AUTO] performs metering in the mode selected under [METERING] mode.

Compensating all WB

This lets you apply the same compensation value to all the white balance modes at once.
MENU[Y][ALL>]

[ALL SET]

: The same compensation value applies to all WB modes.

[ALL RESET]

: The WB compensation value settings applied to each WB mode are all

cleared at once.

If you select [ALL SET]

1) Use

bd to select the color direction.

R-B Red

kBlue/G-M GreenkMagenta

2) Use

ac to set compensate value. “WB Compensation” (g P. 56)

• You can check the white balance you have adjusted.

If you select [ALL RESET]

1) Use

ac to select [YES].

Auto pop up

The built-in flash pops up automatically in low light or backlight conditions while in the

AUTO

or scene mode.
This allows you to stop the built-in flash from popping up automatically.
MENU[Y][AUTO POP UP]

[ON]

: The built-in flash pops up automatically.

[OFF] : The built-in flash will not pop up automatically.

7 FUNCTION

This lets you assign a function to the

b button.

MENU[Y][7 FUNCTION]

[OFF]

Does not allow function allocation.

[

Press the

b button to acquire the WB value.

g “Setting the one-touch white balance” (P. 57)

[TEST PICTURE]

Pressing the shutter button while pressing the

b button enables you to check the

picture you have just taken on the monitor without having to record the picture to the
card. This is useful when you want to see how a picture turned out without saving it.

[PREVIEW]/[LIVE PREVIEW] (electronic)

While holding down the

b button, you can use the preview function.

g “Preview function” (P. 34)

s0013_e_00_unified.book Page 73 Monday, March 5, 2007 10:04 AM