Olympus EVOLT E-410 - Manual (Page 61)

EN
61
Playback functions
4
4 Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below.
1
Press the q (playback) button. (Single-
frame playback)
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if
no operations are performed. The camera will turn off
automatically if there is no operation after 4 hours.
Turn on the camera again.
2
Use p to select images you want to view.
You can also turn the control dial to
switch to U for close-up playback.
Single-frame/Close-up playback
Control dial
INFO button p
q button
Press p to change the
close-up position.
Press p to move the
display of the close-up
position.
Press p to view
frame-by-frame close-
ups.
(Single-frame playback)
(Close-up playback)
Press the INFO button
a : Displays the frame that is
stored 10 frames back
c : Displays the frame that is
stored 10 frames ahead
d : Displays the next frame
b : Displays the previous
frame
(Close-up position
playback)
Press the INFO button
(Close-up playback)
• To exit the playback mode, press
the q button.
• Pressing the shutter button
halfway resumes the shooting
mode.
s0013_e_00_unified.book Page 61 Monday, March 5, 2007 10:04 AM