Olympus EVOLT E-410 - Manual (Page 22)

22
EN
Mastering the E-410
1
It is possible to use the LCD monitor as a viewfinder and check the subject’s composition, or
shoot while viewing an enlarged display on the LCD monitor.
1
Press the u button.
• The subject is displayed on the LCD monitor.
2
Press the shutter button all the way down to focus and shoot.
• To focus in advance, hold down the AFL button and press the shutter button. The focus is
locked when the AFL button is pressed.
• The image display on the monitor freezes as the mirror goes down during focusing. The
picture you just took is briefly displayed on the monitor so you can check the picture.
To focus using MF
1
Set [AF MODE] to [MF].
g “Focus mode” (P. 47)
• Turn the focus ring and focus on the subject. For MF shooting method, refer to “Focus mode”
(P. 47).
• You can also press the AFL button to activate auto focus.
Switching the information display
You can press the INFO button to switch the information displayed on the monitor.
*1 Displayed when [FRAME ASSIST] is set.
*2 For operation in the enlarged display, refer to “Enlarged display operation” on the next page.
Live view
Control dial
AFL button
u button INFO button
Information display
ON
Information display ON
+ Ruled lines display
*1
Information display ON
+ Histogram
Enlarged display *2 Information display
OFF
s0013_e_00_unified.book Page 22 Monday, March 5, 2007 10:04 AM