Olympus D-150-C-1 - Manual (Page 52)

52
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Adjusting the Monitor Brightness
1 / 3
SET OK SELECT
NO
OFF
NO
NO
3 / 3
END OK SELECT
SET OK SELECT
You can adjust the brightness of the monitor to make it easier to see when shooting
under daylight or in the dark, as well as when viewing images on the monitor.
Check that the lens barrier is closed and the
camera is set to the Playback mode by
holding down the
monitor button for a moment.
Operating Procedure
1.
Press the OK/menu button.
[ The monitor shows the Playback mode
menu 1/3.
2.
Press the or arrow pad key
to display the menu 3/3, and select
.
3.
Adjust to the desired brightness by
pressing the
(+/to brighten) or
(–/to darken) arrow pad key.
4.
Press the OK/menu button.
[ All the images will be displayed at the
set brightness.
ⅷThe brightness setting will be held in memory even after the camera is
turned off.
ⅷThe monitor brightness can also be set from the Shooting mode menu.
Playback mode menu 1/3 screen
Playback mode menu 3/3 screen
Monitor adjustment screen
Arrow pad
OK/menu button
Monitor button