Olympus D-150-C-1 - Manual (Page 42)

42
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Viewing Pictures
Record mode
Date/time
File No. Frame No.
Remaining battery power
Printing indicator
Protection indicator
Check that the card is set and
the lens barrier is closed.
Operating Procedure
HQ
24
1.
Keep the monitor button
depressed for a moment.
[ The camera turns on and enters the
Playback mode. After a moment, the last
picture you took appears on the monitor.
[ The monitor information is displayed as
shown on the left.
[ After a moment, all displayed data except
the frame No. and remaining battery
power indicators disappear.
ⅷ If no pictures have been saved,
“NO PICTURE” appears on the
monitor.
ⅷ If there is a problem with the card, the
monitor shows the corresponding
message. (
Page 93)
ⅷ If the remaining battery power is low, the
remaining battery power indicator lights
in red.
2.
Press the monitor button again to
switch the monitor and camera power
off.
When the camera is powered by batteries, it turns off automatically when no
operation has been performed for one minute. If the camera has turned off,
press the
monitor button to resume operation.
Monitor information
Monitor button
Monitor