16 en, Using gps – Olympus Tough TG-1 iHS User Manual
Page 16
16 EN
Using GPS
1
Select [On] for [GPS Settings] > [GPS] in the
d (Settings Menu 3) tab.
“Setup menu” (p. 9)
●
Once the camera has determined the position,
and location coordinates will appear in the display.
P
P
0.0
0.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
12
M
0:34
0:34
44 N
ORM
GPS
Blink: Searching GPS signal
Light: Receiving GPS signal
The camera may take a few minutes to determine
position after a period of disuse.
If the icon is still fl ashing after several minutes,
the camera is probably having diffi culty detecting
a signal. Move to an unobstructed outdoor area or
otherwise change your location.
2
Press and hold
button in the shooting
or playback display.
●
Your location will be displayed in the monitor.
●
Nearby landmarks in the GPS database will be
displayed.
OK
---------
Updated 1 min ago
2012/02/26
00:00
Latitude/Longitude
N123°56' 78''
E123°56' 78''
Barometer
877hpa
Altitude/Water Depth
1200m
LOG
MENU
Back
Update GPS
0
6
4
5
3
2
1
7
8
9
1
Landmark name
2
Landmark information
position
3
Electronic compass
4
Update status
5
GPS tracking active
6
Latitude
7
Longitude
8 Atmospheric/
Hydraulic pressure
9 Altitude/Water depth
0
Current date and time
FGHI
Select a landmark.
A
Update GPS data.
Some countries or regions may regulate the use of
GPS devices. Follow all local regulations.
Turn GPS off when on board aircraft and in other
locations in which the use of GPS devices is
prohibited.
The provision of A-GPS data may be terminated
without prior notice.
Position data may be unavailable or contain errors in
the following locations:
●
Locations without a clear view of the sky (indoors,
underground or underwater, or near trees or tall
buildings)
●
Locations subject to strong magnetic or radio
interference (near high-voltage power lines,
magnets, electronic devices, or cell phones
operating in the 1.5 GHz band)
GPS data may take more time acquire or be
unavailable in some locations or at certain times of
day.
Do not cover the GPS antenna with your hands or
metal objects.
If the battery is low, the camera cannot acquire GPS
data while the camera turns off.
The camera is not equipped for GPS navigation.
While [Track] is [On], the GPS receiver will continue
to draw power from the battery when the camera is
off.
GPS data are not recorded with movies.
Press the INFO button while the camera is turned
off. The current time and the shooting location are
displayed for approx. 30 seconds.