Olympus DM-2 - Manual (Page 75)

3
EN
M
en
u s
et
tin
g m
et
ho
d
Menu setting method
G LCD/Sound Menu
Backlight
The display will remain lit for about 10 (Initial
setting) seconds when a button on the
recorder is pressed.
1 Select [Backlight] from the menu
on the [LCD/Sound Menu].
2 Select [Lighting Time], [Dim light
Time ] or [Brightness].
When [Lighting Time] is selected:
[5 seconds] [10 seconds] [30
seconds] [1minute] [Always On]
When [Dim light Time] is selected:
[30 seconds] [1minute] [2minute]
[5minute] [A lways On]
When [Brightness] is selected:
Adjust the setting between [01] and
[03].
3 Press the + or − button to change
the setting, and then press `OK
button to confirm the setting.
LED
You can set it so the LED indicator light does
not turn on.
1 Select [LED] from the menu on the
[LCD/Sound Menu].
2 Select [On] or [Off].
[On]:
LED light will be set.
[Off]:
Disables this function.
Beep
The recorder beeps to alert you to button
operations or warn you of errors. System
sounds may be turned off.
1 Select [Beep] from the menu on
the [LCD/Sound Menu].
2 Select the beep level.
Adjust the setting between [05] and [00].
Language (Lang)
You can select the display language for this
recorder.
1 Select [Language] from the menu
on the [LCD/Sound Menu].
2 Set the Language.
[English] [Français] [Español]:
• The selectable language differs depending
on the region.
Voice Guide
Refer to “Guidance [Voice Guide]” (☞ P.87).
Alarm
Refer to “Alarm playback function [Alarm]”
(☞ P.89).