Olympus DM-2 - Manual (Page 74)

3
EN
Menu setting method
Play Speed
The playback speed of the file can be changed
between [50%] and [600%] times speed.
Change the speed according to need such as
listening to meeting content at a fast speed
or reviewing spots that you couldn't catch in
a language lesson at a slow speed.
1 Select [Play Speed] from the
menu on the [Play Menu].
2 Set the playback speed.
[0%] to [00%]
This operation can be performed
when the [Play Speed] function has
been assigned to a Fn button (F1 or
F) (☞ P.77).
Performing settings with Fn
buttons:
1 Press the Fn (SPD) button.
2 Press the + or − button to specify
a speed setting, and then press
the `OK button.
• Even if playback is stopped, the changed
playback speed will be retained. The next
playback will be at that speed.
Restrictions on double speed playback:
Normal operation may not be available
depending on the sampling frequency and the
bit rate of the file to be played back. In such a
case, reduce the speed of the fast playback.
• If [Play Speed] has been assigned in the
[Fn. setting] settings (☞ P.77), use the
assigned button to enter the [Pl ay Speed]
setting display.
• The [Speed] setting in the [Voice Guide]
settings (☞ P.88) is disabled during file
playback.
Skip Space
This function enables you to skip (forward) or
reverse skip (rewind) a file being played for
a set period. This function is convenient for
quickly skipping to another playback position
or repeatedly playing back short phrases.
1 Select [Skip Space] from the menu
on the [Play Menu].
2 Select [Forward Skip] or
[Reverse Skip].
3 Set the skip space.
When [Forward Skip] is selected:
• Playback starts after skipping forward
the specified interval.
[File Skip] [10sec. Skip] [30sec. Skip]
[1min. Skip] [5min. Skip]
[10min. Skip]
When [Reverse Skip] is selected:
• Playback starts after skipping back
the specified interval.
[File Skip] [1sec. Skip] to [5sec. Skip]
[10sec. Skip] [30sec. Skip]
[1min. Skip] [5min. Skip]
[10min. Skip]
Forward/Reverse Skip Playback:
1 Press the `OK button to start
playback.
2 Press the 9 or 0 button.
• The recorder will skip (forward) or
reverse skip (rewind) a set space and
start playing back.
• If there is an index mark or a cue
closer than the skip space, the
recorder will forward skip/reverse
skip to that position.
Play Scene
Refer to “Setting the playback scene [Play
Scene ]” (☞ P.86).
M
en
u s
et
tin
g m
et
ho
d