Olympus DM-2 - Manual (Page 122)

1
4
EN
Connecting to your PC
Disconnecting from your PC
Windows
1 Click [ ] on the task bar
located at the lower-right corner
of the screen. Click [Safely
remove USB Mass Storage Device ].
• The drive letter will differ depending
on the PC being used.
2 Confirm that the recorder LED
indicator light is gone before
disconnecting the USB cable.
• The LED indicator light will light up
(orange) in case of charging, however
you can still disconnect the USB cable
in such condition.
Macintosh
1 Move the drive icon for this
recorder that is appear on the
desktop to the garbage bin by
Drag & Drop it.
2 Confirm that the recorder LED
indicator light is gone before
disconnecting the USB cable.
• The LED indicator light will light up
(orange) in case of charging, however
you can still disconnect the USB cable
in such condition.
Notes
• NEVER disconnect the USB cable while the
LED indicator light is flashing. If you do,
the data will be destroyed.
• When the recorder is connected to a PC,
the power will be supplied from the USB
cable.
• Refer to the user’s manual for your PC
regarding the USB port on your PC.
• Be sure that you connect the USB cable
either directly to the USB port on your PC.
• Be sure to push the cable connector all the
way in. Otherwise, the recorder may not
operate properly.
• Cancel Hold mode.
Co
nn
ec
tin
g t
o y
ou
r P
C