Olympus DM-2 - Manual (Page 42)

2
EN
• Stop recording and the file that was just
recorded will be played back.
Pause
While the recorder is during recording
mode, press the REC button.
• The recorder will time out after 120
minutes when left in “Rec Pause”.
Resume Recording:
Press the REC button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during
recording mode, press the `OK
button.
Notes
• When a microSD card is inserted in the
recorder, be sure to confirm the recording
media as either [Built-in] or [microSD] so
that there is no mistake (☞ P.77).
• If the REC button is pressed when a
function other than the record function is
specified, [C annot record in this folder]
is displayed. Select a folder from [Fo lder
A] through [Folder E] and start recording
again.
• To ensure recording from the beginning,
start speaking after you see the LED indicator
light on.
• When remaining recording time is less
than 60 seconds, the LED indicator light
starts flashing. When the recording time
is decreasing to 30 or 10 seconds, the light
flashes faster.
• When [Folder Full] appears, the recorder
will not be able to record anymore. Delete
any unnecessary files before recording any
further (☞ P.61).
• Recorder will not be able to record
anymore when [Me mory Full] appears.
Delete any unnecessary files before
recording any further (☞ P.61).
• We recommend formatting the record
media in the recorder before recording
(☞ P.97).
Recording
Re
co
rd
in
g