Brother NX-200 User Manual
Page 87
Appliqué, Patchwork and Quilt Stitching 81
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
4
Slide the drop feed lever, located at the rear
of the machine on the base, to
(to the
right as seen from the front of the machine).
1 Feed dog position switch
(as seen from the rear of the machine)
2 Back side
X
The feed dogs are lowered.
5
Turn on the sewing machine, and then select a
stitch.
• For details, refer to “Selecting stitching”
6
Use both hands to stretch the fabric taut, and
then move the fabric to follow the pattern.
Reinforcement stitches are sewn at the
beginning and end of sewing.
1 Pattern
7
After sewing is finished, slide the drop feed
lever to
(to the left as seen from the
front of the machine) to raise the feed dogs.
1 Back side
• Normally, the drop feed lever is positioned
at the left.
Note
● The optional quilting foot is available
through your brother retailer.
1
2
1
1
F0_brotherE.book Page 81 Wednesday, May 21, 2003 11:38 AM