Brother NX-200 - Manual (Page 48)

SEWING BASICS ————————————————————————————————————————————————————————
42
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
7
After 3 to 5 reverse stitches have been sewn,
release
(reverse/reinforcement stitch
button).
X The machine stops sewing.
8
Press (start/stop button), or press down
on the foot controller.
At this time, if the start/stop button is held
pressed, the machine sews at a low speed.
X The machine starts sewing in the normal
sewing direction.
9
After sewing to the end of the stitching, the
sewing machine stops.
Release the start/stop button or foot controller.
1 Beginning of stitching
2 End of stitching
■ Sewing reinforcement stitches
When sewing stitches other than straight or zigzag
stitches that are secured with reverse stitching,
pressing (reverse/reinforcement stitch
button) sews reinforcement stitches, 3 to 5 stitches
on top of each other.
1 Reverse stitching
2 Reinforcement stitching
Memo
● Whether reverse stitches or reinforcement
stitches are sewn depends on the stitch that
is selected. For details, refer to “Stitch
Settings” (page 92).
1
2
5
6
4
3
1
2
1 2
F0_brotherE.book Page 42 Wednesday, May 21, 2003 11:38 AM