Brother NX-200 - Manual (Page 62)

UTILITY STITCHES ———————————————————————————————————————————————————————
56
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Overcasting Stitches
Sew overcasting stitches along the edges of cut fabric to prevent them from fraying. Seven stitches are available for
overcasting. The procedure for sewing overcasting stitch is explained according to the presser foot that is used.
Sewing overcasting stitches using overcasting foot “G”
Two stitches can be used to sew overcasting with overcasting foot “G”.
1
Attach overcasting foot “G”.
• For details, refer to “Replacing the presser
foot” (page 29).
2
Select a stitch.
• For details, refer to “Selecting stitching”
(page 54).
3
Position the fabric with the edge of the fabric
against the guide of the presser foot, and then
lower the presser foot lever.
1 Guide
4
Sew with the edge of the fabric against the
presser foot guide.
1 Needle drop point
Stitch Name Pattern Application
Stitch Width
[mm (inch.)] Stitch Length
[mm (inch.)] Presser
Foot
Auto Manual Auto Manual
Overcasting
stitch
Preventing fraying in medium
weight and thin fabrics
3.5
(1/8)
2.5–5.0
(3/32–3/16)
2.0
(1/16)
1.0–4.0
(1/16–3/16)
G
Preventing fraying in thick fabrics
and fabrics that fray easily
5.0
(3/16)
2.5–5.0
(3/32–3/16)
2.5
(3/32)
1.0–4.0
(1/16–3/16)
G
1
● After adjusting the stitch width, slowly
turn the balance wheel toward you and
check that the needle does not touch the
presser foot. If the needle hits the presser
foot, the needle may bend or break.
1
CAUTION
F0_brotherE.book Page 56 Wednesday, May 21, 2003 11:38 AM