Brother NX-200 - Manual (Page 2)

Cover A
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Enclosed Accessories
After opening the box, check that the following accessories are enclosed. If any item is missing or damaged,
contact your retailer.
Accessories
The following items should also be enclosed in the box.
1. 2. 3. 4. 5. 6. 7. 8. 9.
10.* 11. 12. 13. 14. 15. 16. 17. 18.
19. 20. 21. 22. 23. 24.
* 75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name
Part Code
No. Part Name
Part Code
U.S.A. Others U.S.A. Others
1 Buttonhole foot “A” XC2691-051 13 Eyelet punch 135793-001
2 Overcasting foot “G” XC3098-051 14 Screwdriver (large) X55467-051
3 Monogramming foot “N” X53840-351 15 Screwdriver (small) X55468-051
4 Zipper foot “I” X59370-051 16 Spool cap (large) 130012-054
5 Zigzag foot “J” (on machine) XC3021-051 17 Spool cap (medium)(2) X55260-153
6 Blind stitch foot “R” X56409-051 18 Spool cap (small) 130013-154
7 Button fitting foot “M” 130489-001 19 Extra spool pin (horizontal) XC4654-051
8 Seam ripper X54243-001 20 Spool net XA5523-050
9 Bobbin (4) SA156 XA5539-151 21 Foot controller XC1154-051
10 Needle set X58358-051 22 Operation manual XC4665-051
11 Twin needle X59296-051 23 Quick reference guide XC4546-051
12 Cleaning brush X59476-051 24 Hard case XC2360-152
Note
(For U.S.A. only)
● Foot controller: Model N5V
This foot controller can be used on this
machine model NX-200.
● The screw of the presser foot holder is
available through your authorized dealer.
(Part code: XA4813-051)
● The organized accessory tray is available
through your authorized dealer.
(Part code: XC4489-051)
F0_brotherE.book Page A Wednesday, May 21, 2003 11:38 AM