AEG 49332I-MN - Manual (Page 33)

13.6 Covering terminal board
The recommended cross-section area is
six square millimetres (6 mm²).
When you refit the mains terminal cover,
make sure that the lower tabs are loca-
ted inside the bottom edge of the aper-
ture, before you fix the two screws into
the top edge of the mains terminal cov-
er.
Make sure that the cover is securely fas-
tened.
To open the cover of terminal
board obey the procedure in op-
posite sequence.
13.7 Terminal board
N N N L L
Make sure that the links are fitted as
shown.
Do not remove blanking plates.
14.
GB IE
GREAT BRITAIN & IRELAND - GUARANTEE/
CUSTOMER SERVICE
14.1 Standard guarantee
conditions:
We, Electrolux, undertake that if within
12 months of the date of the purchase
this Electrolux appliance or any part
thereof is proved to be defective by rea-
son only of faulty workmanship or mate-
rials, we will, at our option repair or re-
place the same FREE OF CHARGE for la-
bour, materials or carriage on condition
that:
• Appliance has been correctly installed
and used only on the electricity supply
stated on the rating plate.
• Appliance has been used for normal
domestic purposes only, in accord-
ance with manufacturer's instructions.
• Appliance hasn't been serviced, main-
tained, repaired, taken apart or tam-
pered with by person not authorised
by us.
• Electrolux Service Force Centre must
undertake all service work under this
guarantee
• Any appliance or defective part re-
placed shall become the Company's
property.
• This guarantee is in addition to your
statutory and other legal rights.
ENGLISH
33