beautypg.com

3 activating and deactivating the hob, 4 activating and deactivating the outer rings, 5 heat setting – AEG 49332I-MN User Manual

Page 10: 6 automatic heat up, 7 power management, 8 timer

background image

Display

Description

-

The cooking zone operates.

The STOP+GO function operates.

The Automatic Heat Up function operates.

There is a malfunction.

A cooking zone is still hot (residual heat).

The Lock / The Child Safety Device operates.

The Automatic Switch Off operates.

5.3 Activating and
deactivating the hob

Touch

for 2 seconds to activate the

hob. Touch

for 1 second to deacti-

vate the hob.

5.4 Activating and
deactivating the outer rings

You can align the heating surface with
the dimension of the cookware.
To activate the outer ring, touch the sen-
sor field

or

. The indicator comes

on. For more outer rings touch the same
sensor field again. The next indicator
comes on.
To deactivate the outer ring, do the
same steps again. The indicator goes
out.

5.5 Heat setting

Touch

to increase the heat setting.

Touch

to decrease the heat setting.

The display shows the heat setting.
Touch

and

at the same time to

deactivate the cooking zone.

5.6 Automatic Heat Up

You can get a necessary heat setting in a
shorter time if you activate the Automat-
ic Heat Up function. This function sets
the highest heat setting for some time
(see the graphic), and then decreases to
the necessary heat setting.
To start the Automatic Heat Up function:

1.

Touch

.

comes on in the dis-

play.

2.

Touch

again and again until

comes on in the display.

3.

Immediately touch

again and

again until the necessary heat set-
ting comes on. After 3 seconds
comes on in the display.

To stop the function touch

.

1

2

3

4

5

6

7

8

9

10

11

0

1

2 3 4 5 6 7

8 9

5.7 Power management

Operating both ovens and the four hob
zones at the same time can activate the
power management system, which will
deactivate one or more of the hob heat-
ing zones. This is a power regulation
within the appliance to prevent a circuit
overload

5.8 Timer

Use it to set an automatic switch-off time
for a cooking zone.

1.

Set the cooking zone. Touch
again and again until the indicator
for the necessary cooking zone
comes on.

You must set the cooking zone
before you activate the timer.

10 www.aeg.com