AEG 49332I-MN - Manual (Page 29)

11.4 Main oven
11.5 Cleaning the door glass
panels
The door glass on your product
can be different in type and
shape from the example you see
in the diagram. The number of
glasses can also be different.
Removing the glass:
1
2
A
1. Push the door trim at one side to re-
move it. Refer to the diagram.
2. Pull up the trim.
3. Remove the glass panels.
To replace the glass panels, do
the above steps in the opposite
sequence. Before you lower the
trim, attach the A trim part to the
door. Refer to the diagram.
11.6 Oven lamp
WARNING!
Be careful when you change the
oven lamp. There is a risk of elec-
trical shock.
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or
deactivate the circuit breaker.
Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.
Replacing the oven lamp
1. You can find the lamp glass cover at
the back of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with an ap-
plicable 300 °C heat-resistant oven
lamp.
Use the same oven lamp type.
4. Install the glass cover.
ENGLISH
29