AEG Voxtel S120 - Manual (Page 35)

35
UK
If for some reason, the handset is not registered to the base station (
flashes even when the handset is near the base station), register your
handset according to the following procedure.
tPress and hold on the base station for more than five seconds, to
put the base station into registration mode. It will stay in registration
mode for about 1 minute, so the following handset sequence must be
completed within this time.
tPress and
/ to select “REGISTER”.
tPress
OK
and select the destination base you would like to register to.
tPress
OK
and you are requested to enter the 4-digit system PIN.
tEnter the 4-digit system PIN.
tPress
OK
to confirm.
If the handset registration is successful, you will hear a confirmation tone
and the will stop flashing. The handset will automatically be allocated
the next available handset number. This handset number is shown
in the handset display in standby mode. If the handset registration is
unsuccessful, the will still flash.
10.8 Reset Your Phone
You can reset your phone to the default settings. After reset, all you
personal settings and call log entries will be deleted, but your phonebook
remains unchanged.
tPress and
/ to select “DEFAULT”.
tPress
OK
and you are requested to enter the 4-digit pin (default 0000).
tEnter the 4-digit system PIN.
tPress
OK
to confirm.
tPress
OK
to re-confirm.