AEG Voxtel S120 - Manual (Page 27)

27
UK
Key Function
1 Play the selected Care Voice message in step 3.
2 Record a Care Voice message.
3 Activate the Care Voice message.
4 Deactivate the Care Voice message.
Note:
>If you press 2, start recording the message after a beep, and then
press 2 to save. If there is already a Care Voice message recorded
before, it will be replaced.
>If you press 3, enter the time in 24 hour format (HH:MM), and then
press 3 to confirm. The time will be played, and then you can press 3
to reconfirm or press * to cancel. If the Care Voice message is saved in
this case, it will announce once only at the set time.
10.4.6 Change the CareMemo PIN
When you access the CareMemo line remote mode, you will need to
enter the CareMemo PIN. You can change the PIN by menu.
tPress and
/ to select “CAREMEMO“.
tPress
OK
and / to select “CHG PIN“.
tPress
OK
and display will show “OLD PIN?”.
tPress
OK
to enter the old PIN (default is 0000).
Note:
If the PIN entered is incorrect or invalid, display will return to the previous
menu.
tPress
OK
and display will show “NEW PIN?”.
tPress
OK
to enter the new PIN.
tPress
OK
and display will show “CONFIRM?”.
tPress
OK
to repeat the new PIN.
Note:
If the new PIN re-entered is not matched with the new PIN, display will
return to step 5.
tPress
OK
to confirm.