AEG Voxtel S120 User Manual

Page 17

7.13.3

Transfer an external call from handset to handset

During an external call:
tPress and

/ to select “INTERCOM“.

tPress

to select the desired handset to intercom with.

tThe external call is put on hold automatically and the called handset

rings.

tPress on the called handset to establish an internal call.
tPress on the calling handset or put the calling handset on the charging

cradle to end the current call with the external party.

tThe external call is transferred to the called handset.

7.13.4

Transfer an external call from base to handset

During an external call on base:
tGrab off the handset from base cradle, the external call on base will be

transferred to handset automatically, and base will go to idle.

Note:

Before lifting up the handset, please ensure the handset is in line use
status (shows the icon). If you lift up the handset before it showing the

icon, call transfer will be failed, you need to put back the handset on

cradle and try again.

7.13.5

Make a 3-way conference call

The conference call feature allows one external call to be shared with base

and handset or between two handsets (in intercom). The three parties can

share the conversation and no network subscription is required.

Make a 3-way conference call with two handsets:

During an external call:
tFollow Steps 1 to 4 in section 7.13.3.
tPress and hold * on the calling handset to establish the conference call.

Note:

Any handset hangs up during a conference call will leave the other

handset still in connection with the external call.