AEG Voxtel S120 - Manual (Page 23)

23
UK
tPress
/ to select your desired time format (12 HR or 24 HR).
tPress
OK
to confirm.
10.1.3 Set the time
tPress and
/ to select “CLOCK“.
tPress
OK
and / to select “SET TIME“.
tPress
OK
to enter the time information. The time entered will be in the
format you set in section 11.1.2
tPress
OK
to confirm.
Note:
If time has been set before, the current time will display, otherwise,
“HH:MM” will display.
10.1.4 Set the date
tPress and
/ to select “CLOCK“.
tPress
OK
and / to select “SET DATE“.
tPress
OK
to enter the date information. The date entered will be in the
format you set in section 11.1.2.
tPress
OK
to confirm.
Note:
If date has been set before, the current date will display, otherwise,
“DDMMYY” will display.
10.2 Alarm settings (Optional)
You can use this phone to set an alarm clock. When an alarm is set, the
displays on the screen. When the alarm time is reached, the and
“ALARM ON” flash on the screen ringing with the alarm melody for a
duration of 45 seconds. You can press any key to disable the alarm. If
snooze function is activated, the alarm will sound again at the end of the
snooze period of 7 minutes.
Note:
>Key press is still applicable if handset keypad is locked and when the
alarm time is reached.
>The alarm volume level is the same as the settings of the handset
ringer volume. If the handset ringer is set to “OFF“, the alarm still
sounds at VOLUME 1 level.
>During an external call or internal call, if an alarm is set and when
the alarm time is reached, the and “ALARM ON” will still flash.