AEG Voxtel S120 - Manual (Page 33)

33
UK
10.6.5 Barge In
Barge in allows two handsets or one handset and base to share the
same external call conveniently, instead of setting up a conference call
by complex call transfer. Please refer to section 7.13.6 for the operation
details.
tPress and
/ to select “BS SET“.
tPress
OK
and / to select “BARGE IN“.
tPress
OK
and / to select “ON“ or “OFF“.
tPress
OK
to confirm.
10.6.6 Change the system PIN Code
A 4-digit system PIN code is used for changing the system settings of the
base station. It is used to protect your phone against unauthorized use.
The default system PIN code is 0000.
tPress and
/ to select “BS SET“.
tPress
OK
and / to select “CHG PIN“.
tPress
OK
and you are requested to enter the 4-digit system PIN.
tEnter the old system PIN.
tPress
OK
and enter the new system PIN.
tPress
OK
and enter the new system PIN again.
Note:
If the new PIN entered in Step 6 is not matched with the new system PIN
entered in Step 5, user is requested to enter the valid system PIN again
in Step 5.
tPress
OK
to confirm.
10.6.7 RCID settings (Optional)
10.6.7.1 Turn On/Off the RCID
tPress and
/ to select “BS SET“.
tPress
OK
and / to select “RCID“.
tPress
OK
and / to select “ON“ or “OFF“.
tPress
/ to select “ON“ or “OFF“.
tPress
OK
to confirm.
10.6.7.2 Set the number length
tPress and
/ to select “BS SET“.