AEG Voxtel D235 - Manual (Page 38)

38
12 TROUBLESHOOTING
Problem Causes Solutions
No dialling tone when
pressing key
t The connection cord
of the base station
is not plugged in.
t The adapter cord is not
plugged in correctly
in the base station.
t Another handset
is using the base
to make a call.
t Wrong telephone
line cord
t Check the connections.
Unplug and plug back
in the mains. Check
that the telephone cord
has been plugged into
the base station and
the phone socket.
t Check the base station
plug and the 230V plug
(remove and plug-in).
t Wait until the line
is unoccupied.
t Use the original
telephone line
cord supplied
When connect to
a PBX, no and/or
wrong connection
after dialling. Dialling prefix is needed. Insert the dialling prefix.
„SEARCHING“
is displayed.
t Base station out
of range.
t Base station not
connected to mains.
Reduce the range.
Connect base
station to mains.
The call does not work. Service not activated or
wrong setting. Check your Subscription
with network or change
the dial mode.
No display. Empty battery. Recharge battery.
Answering machine
The unit does not
record new messages. The answering machine
is turned off. Turn on the answering
machine.
The caller cannot
leave a message.
t The answering machine
is turned off.
t Message memory is full.
t ANSWER ONLY
mode is set.
t Turn on the answering
machine.
t Erase unnecessary
messages.
t Change to ANS
& REC mode.