AEG Voxtel D235 User Manual
Page 27
27
UK
10.4.2 Set the Ringer Volume
tPress and
/ to select “BS SETTINGS“.
tPress
OK
and / to select “RING VOLUME“.
tPress
OK
and / to select the desired ringer volume (a total of 6
ringer volume levels including “VOLUME OFF“).
Note:
The respective ringer volume will be played during your selection.
tPress
OK
to confirm.
10.4.3 De-register a Handset
This operation should only be necessary if one of your handsets becomes
faulty or lost and needs to be replaced.
You will need to enter the 4-digit system PIN (Default PIN is 0000) in order
to de-register a handset from the base station. A de-registered handset
will have the antenna flashing and “REGISTER“ on the display.
Note:
You cannot de-register the handset that you are currently using.
tPress and
/ to select “BS SETTINGS“.
tPress
OK
and / to select “DELETE HS“.
tPress
OK
and the display shows “PIN?----“.
tEnter the 4-digit system PIN.
tPress
OK
and the first handset number is displayed.
tPress
/ to step through the list of registered handsets, and select
the number of the handset you want to de-register.
tPress
OK
to confirm, and the chosen handset will be de-registered.
10.4.4 Change the Flash (Recall) Time
You may need to change the recall (flash) time if your phone is connected
to a PBX. The recall time options are “SHORT“ (the default value of
100ms), “MEDIUM“ (300ms) or “LONG“ (600ms).
tPress and
/ to select “BS SETTINGS“.
tPress
OK
and / to select “FLASH TIME“.
tPress
OK
and / to select your desired flash time (“SHORT“,
“MEDIUM“, “LONG“, with the current setting indicated by an asterisk.
tPress
OK
to confirm.