AEG Voxtel D235 User Manual
Page 23
23
UK
10.1.3 Set the Time
tPress and
/ to select “HS SETTINGS“.
tPress
OK
and / to select “DATE & TIME“.
tPress
OK
and / to select “SET TIME“.
tPress
OK
and then enter the time information in 24 hour format.
tPress
OK
to confirm.
Note:
If time has been set before, the current time will display, otherwise,
“HH:MM” will display.
10.1.4 Set the Date
tPress and
/ to select “HS SETTINGS“.
tPress
OK
and / to select “DATE & TIME“.
tPress
OK
and / to select “SET DATE“.
tPress
OK
and then enter the date information in the format you set in
Section 10.1.1.
tPress
OK
to confirm.
Note:
If date has been set before, the current date will display, otherwise, “DD-
MM-YY” will display.
10.2 Alarm
settings
You can set an alarm time on this phone. When an alarm is set, the alarm
icon is shown on the handset display. When the alarm time is reached,
the alarm icon and “ALARM ON” flash on the handset display, and
the alarm tone rings for 45 seconds. You can press any key to disable the
alarm.
If the snooze function is activated, the alarm will sound again at the end of
the snooze period of seven minutes. You can also press and hold while
the alarm is sounding, to stop the alarm and turn off the snooze function.
Note:
tA key press will still disable the alarm even if the handset keypad is
locked when the alarm rings.
tThe alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to “VOLUME OFF“, the alarm still
sounds at “VOLUME 1“ level.
tDuring an external call or internal call, if an alarm is set and when the
alarm time is reached, the and “ALARM ON” will still flash. An alarm