AEG Voxtel D235 User Manual

Page 10

5.5

Overview of the wireless headset (see P4)

Power / talk on/off
tIn idle mode: press and hold to power the wireless headset on

or off.

tDuring ringing: press to answer the call.
tDuring a call: press to end the call.
tDuring registration: press to exit the registration mode.

Volume up / ﬂash
tDuring a call: press to increase the earpiece volume. Press and

hold to answer a second incoming call.

tDuring ringing: press to increase the ringer volume.

Volume down
tDuring a call: press to decrease the earpiece volume.
tDuring ringing: press to decrease the ringer volume.

Note:

If the wireless headset is not registered, press and hold volume up / ﬂash

key together with volume down key to initiate the registration mode.

5.6

Wireless headset LED indicators

Purple

tSteadily on: the wireless headset is unregistered.
tFlashing: the wireless headset is registered, but the base

is not available (searching or out of range).

Blue

tSteadily on: when the headset is seated in the base and

fully charged.

tOnce the headset is successfully registered, the blue

light will ﬂash on then off, for about three seconds at a

time, and emit a long beep.

tSingle ﬂashing: the wireless headset is in idle mode and

off the base.

tDouble ﬂashing: the wireless headset is on a call, and if

the signal becomes weak, double beeps will be heard.

tContinuously ﬂashing: the wireless headset is ringing. A

ringing will also be heard in the earpiece.