AEG Voxtel D235 User Manual
Page 28
28
10.4.5 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the
base station. It is used to protect your phone against unauthorised use.
The default system PIN code is 0000.
tPress and
/ to select “BS SETTINGS“.
tPress
OK
and / to select “CHANGE PIN“.
tPress
OK
and the display shows “PIN?------“.
tEnter the old system PIN.
tPress
OK
to display “NEW PIN?------“, and enter your new 4-digit
system PIN.
tPress
OK
to display “CONFIRM?------“, and enter your new 4-digit
system PIN again.
Note:
If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5 you must enter the new system PIN at step 5 again.
tPress
OK
to confirm.
10.4.6 PBX ACCESS
If you use the phone on a PBX that needs an access digit to get an external
line, a single digit can be set to dial automatically before any Phonebook
or Calls List number.
tPress and
/ to select “BS SETTINGS“.
tPress
OK
and / to select “PBX ACCESS“.
tPress
OK
to show “CODE“, then enter your access digit (1-0) and press
OK
to confirm it and activate the feature.
Note:
Press
to delete any access digit, and deactivate the feature.
10.5 Registration
Important:
When you purchase your phone, all handsets are already registered to
your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.