AEG Voxtel D235 - Manual (Page 17)

17
UK
Note:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
7.11 Make an internal call (Multi-handset versions only)
This feature is only applicable when there are at least two registered
handsets or at least one handset and a headset.
It allows you to make internal calls, transfer external calls from one
handset to another handset / headset and make conference calls. If the
called handset / headset is not answered within 60 seconds, the called
handset / headset will stop ringing and the calling handset will return to
standby mode.
Note:
If only one handset is registered to the base station, when is pressed,
it will display “NOT POSSIBLE”.
7.11.1 Intercom another handset or headset
tIn idle mode, press and all the other registered handset / headset
numbers will display, along with a “9“.
tEnter the number of the handset / headset that you want to call, or enter
9 to call all handsets and headsets.
tThe called handset / headset rings and must be pressed on that
handset / headset to establish the intercom call.
Note:
If only one other handset / headset is registered to the base station,
pressing will call the other handset / headset immediately.
Note:
If there is an external call while you are on an intercom call, you‘ll hear
warning beeps, and you have to end the intercom call, before you can
answer the external call.
7.11.2 Call all handsets and headsets
tIn idle mode, press and the registered handset / headset numbers
will display.
tPress the 9 key to ring to all registered handsets / headsets.
7.11.3 Transfer an external call to another handset / headset
During an external call: