AEG Solo combo 15 - Manual (Page 30)

28
If you have selected “ANSWER ONLY” mode, the caller can only listen to your announcement but
cannot leave you a message.
If the answering machine memory is full, “MEMORY FULL!” appears on the handset, and you will
have to delete some messages before any new ones can be recorded.
16.1 Turning the Answering Machine On/Off
tFrom the home screen, press
.
tPress
to “ANSW MACHINE” and then press to select.
tPress to “ANSW. ON/OFF” and then press to select.
tPress
to select “ON” or “OFF” and then press to confirm.
>A confirmation tone is played.
tPress to return to standby mode.
Note:
If the answering machine is off and the Master PIN is still set at its default 0000, the answering machine
will not answer any incoming calls.
However, if the Master PIN has been changed, it will answer incoming calls after 10 rings to allow
remote access.
16.2 Answer Mode
The phone comes with two pre-recorded outgoing messages (OGM) for the respective answer modes:
“ANSWER ONLY” and “ANSW. &RECORD”.
By default, the answer mode is “ANSW.&RECORD”, which allows a caller to leave a message on
the answering machine after hearing the announcement. This can be changed to “ANSWER ONLY”
mode, which does not allow callers to leave any messages on the answering machine after hearing
the announcement.
16.2.1 Set Answer Mode
tFrom the home screen, press .
tPress
to “ANSW MACHINE” and then press to select.
tPress to “ANSWER MODE” and then press to select.
tPress
to select “ANSWER ONLY” or “ANSW.&RECORD” and then press to confirm.
>A confirmation tone is played.
tPress to return to standby mode.
16.3 Answering Machine Settings
16.3.1 Set the Ring Delay
You can select the number of rings before the answering machine answers a call and starts playing the
outgoing message (OGM). You can set the delay from 2 to 7 rings, or “ECONOMY“.
Important:
If your network voice messaging system (e.g. the 1571 service) is enabled, you must set your “RING
DELAY” to less than 6 rings; otherwise the network service will answer all your calls before the
answering machine of your telephone and prevent it from recording any messages.
tUsing a cordless handset, from the home screen, press
.
tPress
to “ANSW MACHINE” and then press to select.
tPress
to “SETTINGS” and then press to select.