AEG Solo combo 15 User Manual

Page 15

9.4

Set Ringer Volume

You can set the ringer volume on the corded base from L0 (ringer off) to L5.
tIn standby mode, press + or - to select the desired setting (each volume level will play as it is select).

Note:
The corded base will ring at the selected volume level when it receives an incoming call.
If you set ringer volume to L0, will appear on the LCD and the corded base will not ring when it
receives an incoming call.

9.5

Turn off Ringer

tIn standby mode, press and hold # to turn off ringer.

is displayed on the LCD.

tTo turn the ringer back on, press and hold # again.

9.6

Lock/Unlock the Keypad

tIn standby mode, press and hold * to lock the keypad.

is displayed on the LCD.

tTo unlock the keypad, press and hold *again.

Note:

Incoming calls can still be answered even if the keypad is locked.

9.7

Mute/Unmute the Microphone

tDuring a call, press to turn off the microphone.

is displayed.

tTo unmute the microphone, press again.

9.8

Initiate an Intercom Call from the Corded Base to a Cordless Handset

The system allows an intercom call between the corded base and another registered cordless handset.
tPick up the corded handset from the corded base or press .
tPress

at the bottom of the corded base.

>All registered cordless handsets will start to ring.

tPress on any handset to intercom with the corded base.

>The paging tone on all handsets and the corded base will stop.

Note:
1. You can cancel the intercom call before it is answered by pressing

at the bottom of the corded

base.

2. If there is no answer from the cordless handset within one minute, the paging will be cancelled

automatically.

9.9

Answer an External Call during an Intercom Call on the Corded Base

You will hear an alert tone when you receive an incoming external call during an intercom call on your
corded base, and you can choose from the following options:
tReplace the corded handset onto the corded base or press to end the intercom call. The base will

start ringing and you can answer the incoming call like a normal call.